Printing Mesh News - Screen Printing Mesh | Polyester Printing Mesh

Introduction of Solar Cells Screen Printing

12/25/2017

MAISHI Group is a leading company which manufacturer of stainless steel wire mesh cloth, screen printing mesh etc We can supply you the finest stainless steel wire cloth for solar cell screen printing with exclusive deliveries to MAISHI’s stringent

Three kinds stretching mesh method

12/25/2017

Make the mesh tension with mechanical force, when strectching mesh, first strectch warp, then weft, at the last, stretch mesh with alternate warp and weft, to achieve the required tension, so it is much more uniform than manual stretching mesh

Calculation of the finest line Width...

12/21/2017

In general, the printing line width between 0 1mm to 0 2mm will be called "fine line "

Printing process parameters

12/21/2017

The following are some printing process parameters from MAISHI wire mesh manufacturer Group Please check:

Filter material selection based on filter medium

12/13/2017

For most of medium we can use stainless steel mesh, such as petroleum, chemical industry, mine,airspace, paper-making, electronic metallurgy etc And for filtering under the acid and alkali environment

Polyester screen printing mesh Aperture and opening area

12/13/2017

Opening is the distance between two adjacent wire Opening area is inversely proportional to mesh size and wire diameter

The best printing time after stretching

12/13/2017

Polyester is a kind of elastic material Silk screen printing mesh is woven by polyester wire, So if the tension is too large, the screen printing mesh are easy to lose elasticity and fracture But if the tension is too small, the mesh will be not tight

Some factors affecting clothes printing

12/13/2017

Polyester screen printing mesh are widely used in cloth printing Printing is through the Squeegee extrusion, the ink is transferred through the graphic part of the mesh to the substrate, forming the same with the original graphic