Printing Mesh News - Screen Printing Mesh | Polyester Printing Mesh

Screen printing mesh is the most widely used

02/25/2019

Popular printing methods on the market today are (a) relief printing; (b) gravure printing; (c) lithography; (d) screen printing Among these printing meshs

Polyester mesh and nylon mesh

02/23/2019

Nylon mesh is a nylon monofilament fabric that is woven to provide heat resistance and dimensional stability The plain weave can reach 380 mesh, and the twill weave is greater than 330 mesh The nylon mesh has the characteristics that the surface

Solve the problem of the screen printing mesh in use?

02/23/2019

1 Ink unevenness or color bars appear in printing screen mesh Analysis of the cause: During the printing process, the pattern printed on the substrate sometimes has inconsistent color depth or regular color bar failure on the pattern

Polyester printing mesh super high precision

02/23/2019

The high-strength screen printing meshs are all high-tension, ultra-high precision, very low elongation, no static electricity, and good solvent resistance

You should understand the working pr...

02/22/2019

That is, screen printing plates, squeegees, inks, printing stations, and substrates are the major components of screen printing The basic principle of the production of screen printing nets is something everyone should know

Glass screen printing mesh process

02/21/2019

The screen printing mesh process of glass is based on the printing principle of the screen The ink is printed on the surface of the glass, and then the ink is cured,

Printing mesh printing process introduction

02/20/2019

When printing a fine pattern on a grid, you can select a larger number of screens When the screen printing mesh angle 45 is used, it is possible to print a two-color pattern adjacent or a high-precision horizontal and vertical straight line

How to determine the mesh distance when screen printing mesh

02/19/2019

The mesh distance is an important thing in the screen printing mesh process If it is not set properly, it will result in unsatisfactory printing results