Printing Mesh News - Screen Printing Mesh | Polyester Printing Mesh

Screen printing features

09/27/2018

It is not limited by the size and shape of the substrate Generally, the screen printing mesh can only be carried out on a flat surface, and the silk screen printing can not only print on a flat surface, but also print on a special shape of the molded

What are the characteristics between...

09/27/2018

There are many kinds of production processes for signage signs Today, we mainly talk about the characteristics of corrosion signs and silk screen signs Corrosion signs are divided into positive corrosion and anti-corrosion

What is the difference between rotar...

09/27/2018

Textile screen printing mesh Pattern design, black and white color separation (ie, positive film), generally adopt continuous shooting process photosensitive plate making, in addition to independent flower shape, mainly by manual operation

Attention to the problem when using wire mesh

09/27/2018

For the first time, after pulling a certain tension, it will stand still for 20 minutes and let the tension retract The second time, after pulling two unit tensions higher than the first time, it was still for 20 minutes

How to maintain the service life of the screen printing screen

09/26/2018

1 Since the screen printing mesh is glued to the frame (whether it is a wooden frame or a metal frame), the angle of the inner frame of the screen should be sealed before using the screen; the general plate making company will apply one

The importance of screen printing grid spacing

09/26/2018

The screen printing mesh distance setting is not suitable During the printing process, the blade pressure should be increased or decreased, which will affect the quality of printing, resulting in poor copying accuracy, blur, bubbles, ghosting

Pay attention to these problems when screen printing

09/26/2018

The main reason is that the printing plate is too thin The reason why the screen glue layer is thin may be that the proportion of water mixing is too high; other reasons may be that the screen is not clean enough before the glue is applied

What is the fault of screen printing?

09/25/2018

When using the printing mesh, I occasionally encounter some problems Below I will introduce you to the problems that we sometimes encounter in practice I hope that the following content can help you