The disadvantages of screen printing
1. Multi-color
Silk screen printing mesh can only print one color at a time, which is well known. That is the need for complex, cumbersome coloring for multi-color printing! The color registration technology is relatively high. There are relatively few technicians in this area, and the color is less. If you need to print four or five colors at a time, it will inevitably lead to inaccurate color registration. This increases the scrap rate of the product and the cost increases accordingly. But like the four colors above or the gradient color pattern, silk screen is only impossible!
2. Small batch
Everyone knows that if silk screen printing wants to print a pattern, it must have a set of processes that cannot be saved. That is the plate making and the film. If the amount is small, the cost is quite high. Therefore, the general screen printing company does not pick up small jobs, mainly because the cost is too high!
3, the arc limit
Screen printing, this process can only be used for relatively flat products, if it is some bumps, it can not be completely solved.
4. Ink quantity cannot be controlled
As we all know, some products are to maintain their original state at the same time of printing, especially textile products. After printing, many customers want to maintain the texture of textiles, so it is very difficult to use silk screen printing.
There is a process that can solve the problems of silk screen printing, that is, the flatbed printer. This process is a new type of digital technology, which can be used for one-time printing and printing for a variety of colors, and the printing cost is completely consistent for small batches. Moreover, it is allowed to have a certain curvature (5-7MM), and the amount of ink is very small, and printing on the fabric does not affect the texture at all. Therefore, this process can be combined with silk screen to complete some products that are difficult to solve. Make silk screen technology better and more perfect!
PREVIOUS： What are the aspects to be aware of when using a wire mesh?
