The number of meshes for screen printing screen, the international standard unit is 1T = 2.5 mesh. 2.5 mesh is equal to one square inch with 2.5 meshes.
The number of meshes indicates the density of the screen. The higher the number of meshes, the denser the screen and the smaller the mesh. The screen mesh number can be selected according to the accuracy requirements of the printed product. The selection criterion of the number of meshes is: when the amount of ink required is more than 70-200 meshes / in, generally 200-300 meshes / in for printing, and 300 meshes / in or more for fine graphics.
The number of screen printing meshs matches the original image:
The number of screen meshes selected should be sufficient for the image on the film, that is, to ensure that the finest image area has enough polyester mesh
support.
(The width of the finest line that can be printed by a certain number of screens is equal to the sum of the mesh aperture and the screen diameter plus
The expansion of polyester net yarn is about 7%.
Regarding the mesh number of screen printing screens, the international standard unit is 1T = 2.5 mesh. 2.5 mesh is equal to one square inch with 2.5 meshes. The mesh number indicates the density of the screen. The higher the mesh number, the denser the screen. , The smaller the mesh.
The selection of the screen size can be selected according to the accuracy requirements of the printed product. The selection criterion of the number of meshes is: when the amount of ink required is more than 70-200 meshes / in, generally 200-300 meshes / in for printing, and 300 meshes / in or more for fine graphics.
More popular articles
PREVIOUS： Problems in the use of stainless steel screen printing mesh
