T-shirt manufacturers or textile mills often need to print. Now, in order to improve economic efficiency, acryl printing meshs are clearly selected. Now not only in China, but also abroad, the number of acryl printing screens is now on the rise.
We often see that 90% of T-shirts bought in stores are screen printing. The screen printing technology is relatively complicated. There are mainly design, film, printing, printing, and drying steps. Screen printing, simply speaking, if a T-shirt pattern has three colors of red, yellow, and blue, then three versions need to be printed, one for each color.
T-shirt designers can use their imagination to design various patterns. However, they are distinguished during the inspection of finished products and named according to the phenomenon. In fact, defects are rarely reproducible. Although they have the same phenomenon, they are not necessarily the same cause.
The fabric side is pasted. Due to the uneven width of the grey fabric door, the width is narrow
or the patch is not on the same straight line. The paste on the two ends of the flat screen is printed on the guide belt, and then glued to the back of the next screen, and then printed on the edge of the next page , Resulti
ng in edge ditching; the edge suction device fails, the edge of the cloth into the cloth is not in a straight line; the flat net seals the width of the edge of the dry cloth.
Solution: Grey cloths with different widths must be reorganized, and the width of the machine-printed cloths must be consistent. The two sides of the screen are sealed from the width of the cloth seal and the printing position, so that there are no extra patterns to print the color paste on the guide belt; the edge suction device is intact, and the cloth is applied at the same distance from the side of the guide belt without drifting; The width should be at least 5cm above each side of the cloth seal.
More popular articles
PREVIOUS： High precision printing on nylon printing mesh
