Tip 1. In the rainy days or spring, due to the humid, beside the normal processing of the frame, special attention should be paid to dry the frame in advance. When the adhesive is stretched, the dehumidifier should be prepared or the infrared lamp should be used to match the fan to dry it. .
2. The oven temperature is preferably between 40-45℃. If the oven temperature exceeds 50℃, the sticky mesh starts to soften and it is easy to drop the mesh. Some would like to use cheap all-purpose adhesive,compared with sticky mesh adhesive, cheap all-purpose adhesived stretch net has the following disadvantages: 1) the surface viscosity is large, not easy to penetrate the net; 2) longer drying time, lower work efficiency; 3) soft film, initial viscosity and the final stretch net strength is not high; 4) coated Poor brushability, easy to loose wire; 5)Poor adhesion to the frame; 6) rainy days and wet days the mesh will easily fell off the frame. We suggest you use professional adhesive mesh glue. To be continue......
Disclaimer: Please note this information is not to be used for design purposes, and in NO event shall MAISHI MFG. GROUP be liable for any damages arising from the misuse of this information.
PREVIOUS： Detailed introduction of polyester printing mesh
