After the nylon printing and printing, the silk needs to be cleaned. The specific cleaning precautions are as follows:
1. Use a clean rag to dry the screen. Dilute with Qinyu QY-SY101 Washing Water (cleaning agent), wait a few minutes and dry with a clean, dust-free cloth.
2. If the screen printing ink is dry, put a newspaper underneath the cleaning process, use Qinyu QY-SY101 washing net water (cleaning agent) to dilute and infiltrate it, then rub it repeatedly with a rag or scraper. After dilution, the excess ink can be scraped to a corner and poured back into the ink tank, reducing waste.
3. Mainly in the process of screen printing
, the ink on both sides of the screen printing screen should also be driven. After scraping for a while, use the squeegee to return the ink on both sides, do not let it dry on the board.
4. As far as possible QY-SY201 washing net water cost is relatively high and is an auxiliary, the main purpose is to slow down the ink drying speed, thereby increasing the leveling of the board surface during screen printing.
5. Always wear gloves and clean the screen on the screen to wear overalls. Protective glasses and gloves.
The cleaning method of the ink after the printing of the nylon printing mesh is the above, we must not only master the cleaning method. It is also important to buy a printing mesh produced by a good manufacturer.
More popular articles
- Global Screen Printing Machines Are Choosing To Use Polyester Printing Meshs
- Screen Printing Mesh Electronics Applications
PREVIOUS： The reason why choose polyester mesh for printing
NEXT：What are the most correct steps for cleaning screen printing meshs?
