Nylon printing mesh decontamination method

Nylon printing mesh is the most commonly used printing technology. There are also many printing methods included in screen printing. How do we clean up the decontamination treatment when using it. However, the dedusting of the screen nylon printing mesh has the difficulty of decontamination, and the screen nylon printing mesh is easy to be damaged. The staff of Hebei maishi factory below will give you a detailed introduction to the techniques of screen decontamination.

Nylon printing meshs can also be used according to the following introduction when printing on screen printing meshs or other printing screens.

When screen printing produces dirt or dried ink, it needs to be decontaminated and cleaned. Some operators will directly wipe the screen with solvent-coated gauze. As everyone knows, this is very easy to cause damage to the screen.

We can't directly rub the surface of the wire mesh because the wire mesh can't resist friction. First, you need to control the concentration of the ink, and the ink should not be too thin and too concentrated to reduce the dirt on the screen. Because most of the dirt on the screen is caused by the poor concentration of the ink. Secondly, the dirt was found, the screen printing machine could be stopped, and then a piece of blotting paper was used to make it contact with the screen to achieve the function of ink absorption. Then use a soft cloth coated with detergent to simply wipe, so that dirt will fall through the mesh and fall onto the absorbent paper. When it is clear, remember to blow the surface of the screen with a blower.

If you want to know enough if you want to know more than this, please contact us maishi.