It is by the stretching fixture, nail and sticking glue, fix the wire mesh in the frame.
Normally the tension is much lower, also not nonuniform, the quality is not guaranteed, and the lower cost, the process as follows:
Make mesh frame-choose mesh-stretch mesh-drive nail-adjust the extra mesh-platemaking
2. How to make mechanical stretch mesh
Make the mesh tension with mechanical force, when strectching mesh, first strectch warp, then weft, at the last, stretch mesh with alternate warp and weft, to achieve the required tension, so it is much more uniform than manual stretching mesh.
The process as follows:
Choose the mesh frame-clean frame-dry the frame-pre-coated sticking glue-dry-choose the mesh-strectch the mesh-coated sticking glue-dry-cut and adjust the mesh-paste the adhesive tape-dry-platemaking
3. How to make air pressure stretch mesh
Stretch the mesh by adjusting pneumatic of the cylinders driving the chucks, use the sticking glue to make the mesh and frame together, the process is the same as mechanical stretch mesh, only use the different tension method.
Any questions, please contact us freely.
PREVIOUS： Calculation of the finest line Width of the printing ink in screen printing process
