What are the points that should be noted when printing on screen printing meshs?

Screen printing mesh is often used in the printing industry. Screen printing is a method of orifice printing. Such a printing method is to apply a certain pressure mainly through a perforated screen printing screen. To achieve the ink perforation printed on the corresponding article. What problems do we need to pay attention to when we want to print a good quality work?

There are three points to note.

Point 1: When performing screen printing, our staff needs to check the printing rules during the printing operation. Because of the silk screen process, the screen printing frame will appear non-stop motion. This is very easy to have a collision between the printing plate and the printing frame. In the process of printing workers, the corresponding resets and adjustments need to be made. Otherwise it will affect the quality of the product.

Point 2: After the sample is finished, we need to check the printed samples. The printing staff should also check the situation of the printed proofs in time. If it is found that there is a lack of ink or uneven ink color during printing, the corresponding adjustment should be made immediately. If the ink is too heavy, the ink should be diluted in time if the ink is too shallow. The ink should be added in time to ensure the uniformity of the screen printing product ink.

Point 3: Reasonable placement of screen printed products or semi-finished products. Do not place it at will. This is very important, don't value it. When the screen printing semi-finished products are placed, pay attention to the unevenness. You can put them on the cardboard and the paper on both sides of the product should be stacked. If this is not the case, the flaws of the product will be affected.

The precautions in the screen printing mesh printing process are the above, if you need anything, welcome to choose maishi manufacturers.