Stainless steel products are often used in screen printing meshs, but often a lot of friends will encounter a problem that is not very strong when printed on the silk screen. Maishi is a manufacturer of stainless steel screen printing meshs. The professional production of screen printing network technology masters for us to answer the following reasons.
If it is not strong when silk screen printing on stainless steel, it is an ink problem. In fact, as long as the ink is done, there may be no problem of instability.
When screen printing, it is inevitablethat there is dust on the surface, and the adhesion must have some influence. So use a hard-to-near scrape to scrape it, and more or less wear it off. Being weak is a normal phenomenon, and I have done too much in such a test. It is also possible that the reason may be stainless steel.
This shows that ink is also an important note item. Screen printing mesh ink can be divided into soft plastic ink and hard plastic ink according to the form of the substrate. The volatile drying ink, the ultraviolet curing ink, and the oxidative drying ink are classified according to the drying method. Volatile dry ink: It is the most used ink in screen printing.
It is also normal for us to appear weak when using screen printing on stainless steel. As long as we clean up the dust on the butt gap in the upper side, or solve the problem of checking the ink problem, we will solve it.
