Stainless steel printing mesh is the first choice for keyboard manufacturing, mouse manufacturing, and stainless steel billboard production. It can guarantee the effect of screen printing. Why do a lot of people choose now? Is it any good?
The first thing is to flow the photosensitive glue onto the mesh cloth, and scrape it upwards firmly until it is over the mesh cloth, so that it is evenly coated on the mesh cloth, and then blow dry with hot air from a blower.
After the stainless steel screen is dried, it is necessary to perform photo exposure to prevent all parts from being exposed. Place
the screen flat under the light, and then place the positive film film on the screen. Cover it with glass and squeeze it with two iron clips on the left and right sides. The suitable distance from the light to the screen is 20cm-30cm. The light-sensitive time is about eight to ten minutes.
Use the light-sensitive screen printing screen, using a sponge to wipe lightly. The pressure of the flushing water should be moderate, not too strong, and do not break the mesh.
After the Stainless steel printing meshis printed on the screen, the pattern is washed out with water, and then covered with a dry cloth to prevent moisture from being absorbed. The Stainless steel printing mesh is naturally air-dried or blowed to dry. This completes the basic plate making process.
More popular articles
- Introduction to the Screen printing mesh printing process
- What kind of Stainless steel printing mesh is good?
PREVIOUS： Detailed production of screen printing mesh
