There are many ways to process the surface of stainless steel wire mesh, and the representative one is the etching process in the screen printing mode. Many of our friends are not very familiar with this way of processing. No matter what you know, you need to know in detail to better serve yourself.
The etching process is to screen the acid-resistant protective film on the surface of the stainless steel, and then etch it with a ferrous chloride solution to form an artistic pattern. The spray color method is to spray the color particles after screen printing to form a pear-like surface to form an artistic pattern.
A typical example of a screen printing method is an etching process explanation: an etching process is a screen printing of an acid-resistant maintenance film on a stainless steel exterior, and then etching with a ferrous chloride solution to form an art pattern. The spray color method is to illuminate the color particles after screen printing to form a pear-like appearance and constitute an artistic pattern.
The process of etching art processing of stainless steel products is: stainless steel products → silk screen → etching → alkali treatment → oxidation coloring → finished product.
There are many printing methods for stainless steel products, and other methods such as chemical coloring can be used in addition to the above etching processing methods. No matter what method we need to study carefully.
PREVIOUS： Screen printing glass screen printing process
