Polyester Screen Printing Mesh 21T-150

MaiShi Group has been engaged in the production of aramid mesh fabrics with more than 30 years of experience. The yarns used in the products are purchased from Jintong's well-known raw material producing areas. We produce strictly from production to the end. Products are tested using scientific instruments. Polyester Screen Printing Mesh fabric Products are used in many fields.

Mesh count:15-420mesh/inch

Thread diameter:400micron to 30micron

Material:100% polyester

Width:0.6m-3.6m,custom require available at request

Standard length:30m,50m.custom require available at request

Packing: PVC bag and carton,custome packing available at request

Usage: printing,filter

Certificate: ISO9001

Specification

TYPE	MEHS COUNT	APERTURE	THREAD DIAMETER	OPENING	THICKNESS	INK THROUGH VOLUME THE ORETICALLY	TENSILE STRENGTH
	mesh/inch	micron	micron	%	micron	cm3/m2	n/cm
6-400	15	1300	400	65	780-810	560	110
8-300	20	970	300	58	550-580	406	100
10-250	25	700	250	49	508-518	355	85
12-140	30	700	140	69	250-260	380	50
12-250	30	610	250	53	495-505	305	90
15-250	38	467	250	49	489-501	213	83
18-150	45	410	150	53	255-275	138	60
21-80	55	378	80	68	125-140	125	36
21-150	55	330	150	46	250-260	123	55
24-100	60	316	100	57	188-195	109	49
24-120	60	303	120	51	230-240	104	51
32-80	80	237	80	55	120-130	110	40
30-120	75	213	120	41	205-210	102	52
32-100	80	212	100	46	160-170	69	48.5
36-80	90	202	80	51	145-150	70	45
36-90	90	185	90	45	155-165	65	49
36-100	90	182	100	41	175-185	60	51
39-55	100	195	55	56	76-83	55	24
39-80	100	176	80	48	125-135	73	31
43-80	110	147	80	40.8	118-125	53	31
47-55	120	152	55	51	88-96	47.6	29
48-70	120	135	70	41	108-120	45.5	30
53-48	135	139	48	55	85-90	48	26
53-55	135	128	55	47	88-96	44.5	29
54-64	137	115	64	38.5	85-95	38.9	30
54-70	137	108	70	34	108-120	40	31
58-55	145	118	55	38	89-94	39.5	30
59-55	150	114	55	45	85-90	38	30
61-48	155	115	48	49	76-83	41	30
62-64	155	105	64	42	115-125	33	31
64-45	160	105	48	43	73-82	36.5	28
64-55	160	98	55	38	95-99	36.1	30
64-64	160	88	64	30	100-110	30.7	31
68-55	175	85	55	34	85-95	29.2	30
68-64	175	78	64	29	108-110	32.0	32
72-48	180	90	48	36	68-75	33.1	28
72-55	180	86	55	37	95-105	32.2	33
77-48	195	81	48	34	80-85	29.0	28
77-55	195	75	55	28	86-92	26.6	29
80-48	200	72	48	33	75-84	28.7	27
90-48	230	56	48	25	70-80	23.5	25
100-40	250	58	40	37	66-73	21.3	28.5
110-40	280	52	40	33	68-75	20.5	29.6
120-31	305	49	31	36	60-64	19.5	29
120-34	305	45	34	30.5	60-70	18.4	30.5
120-40	305	37	40	21	65-67	13.5	32
130-34	330	42	34	30	50-55	16.5	31
140-34	355	31	34	19.5	52-58	14.4	31
150-31	380	36	31	29	47-50	13.1	30.5
150-34	380	30	34	20.5	48-53	14.9	30.5
165-31	420	31	31	22.5	42-48	12.5	28.9

Characteristic

Low Elongation,Higher tension

Excellent tear resistance

Very good dimensional stability

Faster tensioning without damage to the threads.

Color: Whtie and Yellow

Production Processing

Material yarn from Jintong, Switzerland and Japan, we inspect those yarn arrived (tolerance, tensile strength, physics test etc.).

During production, first we put the warp wires on the beam, drawing the warp wires into heddle and reed. Then our experienced weaver will start weaving mesh according to orders.

Initial survey is taken during and after weaving. Then the heat setting treatment and physical properties inspection will be done before we get tentative finished rolls (normally 60-500 meters rolls).

In the end, after the final inspection, we will cut the mesh into small rolls (20m-50m) according to customer orders.