Hebei Maishi Wire Mesh is the leading supplier of Polyester Screen Printing Mesh which is also called bolting cloth. It is a type of woven polyester which is extracted from yarn by using a particular mechanism of heating of the polyester. Thus, the heater form is made in a single filament threaded form. The extruded form of thread filament is the manufactured and is spun according to the required diameter. The conventional polyester screen material is made a bit longer by extending the monofilament polyester printing mesh.

Hebei Maishi is recognized to produce quality monofilament polyester printing mesh which is generally known as bolting cloth. Our company manufactures this material according to the required size and high quality. We produce different varieties of polyester screen printing mesh which are considered very significant and provide different advantages these are used accordingly. General Specification of Polyester Screen Printing Mesh: 6T,. 8T, 10T, 12T, 15T, 18T, 20T, 21T, 24T, 28T, 30T, 32T, 36T, 39T, 43T, 47T, 48T, 53T, 54T, 59T, 61T, 62T, 64T, 68T, 72T, 77T, 80T, 90T, 100T, 110T, 120T, 130T, 140T, 150T, 165T, etc.

We are dedicated to supply the quality products manufactured in our company ranging 15 mesh (6T) - 420 mesh (165T), width: 0.6m to 3.9 m. Our products are being available in three different colors such as Yellow, White and Black. Our company has a large quality of stock 500-10000sqm available to deliver to our regular customers. We welcome to our esteemed customers for normal order of different specification according to their demands.
 

Polyester Screen Printing Mesh Production Process:

We buy yarn from Jintong,Switzerland and Japan, we inspect the yarn when they unloaded in our factory. (tolerance,tensile strengh, physics test ect.).

During production, first we put the warp wire on beam, draw the warp wire into heddle and reed. Then our experienced weaver will start weaving mesh accodding to orders.

Initial survey is taken during and after weaving. Then the heat setting treatment and physical properties inspection will be done before we get tentativa finished rolls (normally 60-500 meters rolls).

In the end, after the final inspection, we will cut the mesh into small rolls(20m-50m) according to customer orders.

Notice: Other abnormal specification can be produced if the quantity more than 3000sqm